Conductivity TDS Sensors and Instruments

Product Details:

Sentek UK Make Conductivity Sensor

• Body Type           Glass
•  Range      0 – 50mS
•  Cable Length      1 metre
•  Connector          Instrument Specific
•  Temperature Range   0 – 80°C
•  Shaft Length      120mm
•  Shaft Diameter  6mm
•  Cell Constant      K=1
•  Plate Material    Pt
•  Temp Comp              Instrument Specific

Product Details:

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of 12 mm Laboratory Sensor.

Additional Information:

• Item Code: K-20-6mm

Product Details:

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant

Additional Information:

• Item Code: 3010M

Product Details:

Quick and Easy Measurements:

• Displays conductivity and temperature, or TDS and temperature
• readings at the same time.
• Accepts 2-wire conductivity cells with adjustable K=0.1, K=1 and
• K=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for
• improved usability.
• Convenient one point calibration. Calibration data is stored in memory
• and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC).
• Meter automatically switches into manual compensation when
• temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio
• feedback.

Carefree Maintenance:

• Splash resistant case is made with durable, reinforced plastic for
• added protection. Protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional
• damage.
• Smaller case does not clutter valuable desk space.

Standard Inputs and Outputs:

• RS-232 computer interface.
• 8 pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

Product Details:

E+H Conducta USA Make Conductive conductivity sensor for medium to high measuring ranges

Condumax CLS21 measures conductivity in all process and environmental applications, such as:

• Potable water treatment

• Desalination plants

• Industrial water treatment

• River/lake monitoring

• Phase separation in medium conductivities (e.g. milk/water)

With its international explosion protection approvals, such as ATEX and FM, the sensor is suitable for hazardous area use.

Product Details:

E+H Conuducta USA Make Memosens toroidal conductivity sensor for chemical applications
Application:
Indumax CLS50D or CLS50 sensor is particularly suitable for use in the chemical and process technology sectors

This sensor in a wide range of applications, such as:
• Concentration measurement of acids and bases
• Quality monitoring of chemical products in tanks and pipes
• Phase separation of product/product mixtures

Product Details:

E+H Conducta USA Make Memosens conductive conductivity sensor for hygienic applications in pure and ultrapure water

Condumax CLS16D measures conductivity in pure and ultrapure water applications for the monitoring and control of:

• 1.Ion exchangers

• 2.Reverse osmosis

• 3.Distillation

• 4.Electro-deionizing

• 5.Water for injection (WFI)

With its international explosion protection approvals, such as ATEX, FM, CSA and NEPSI, the digital sensor is suitable for hazardous area use.

Product Details:

E+H Conducta USA Make  Memosens 2.0 contacting conductivity sensor for standard applications in pure and ultrapure water

• Memosens CLS15E measures conductivity in pure and ultrapure water applications for the monitoring and control of:

  • Boiler feedwater

  • Ion exchangers

  • Reverse osmosis

  • Cooling water

  • Distillation

  • Chip cleaning

  The digital sensor can be used in power plants for:

  • Degassed conductivity

  • pH measurement with differential conductivity

  With its international explosion protection approvals, such as ATEX and FM, the sensor is suitable for hazardous area use.

Product Details:

E+H Conducta USA Make Conductive conductivity sensor for hygienic applications in pure and ultrapure water

• Condumax CLS16 measures conductivity in pure and ultrapure water applications for the monitoring and control of:

  Ion exchangers
• Reverse osmosis
• Distillation
• Electro-deionizing
• Water for injection (WFI)
• With its international explosion protection approvals, such as ATEX, FM and CSA, the sensor is suitable for hazardous area use.

 

Product Details:

E+H Conducta USA MAke Conductivity Sensor

• Indumax CLS50 measures toroidal conductivity in:
• Chemicals:
• - Concentration measurement of acids and bases
• - Quality monitoring of chemical products in tanks and pipes
• Food & beverages:
• - Phase separation of product/product mixtures in pipe systems
• Wastewater industry:
• - Inlet monitoring
• With its international explosion protection approvals, such as ATEX, FM, CSA, NEPSI, it is suitable for hazardous areas.

Product Details:

Application:
Typical applications include:
 Phase separations
 Chromatography
 Fermentations
 CIP monitoring in small pipes
 Ultrafiltration

Product Details:

Sentek UK Make Conductivity Sensor Model K10
General Range: 0-150mS
Temp Range: 0-50oC
Body Type: Glass
Plate Material: Pt
Diameter: 120x12mm
Cell Constant: K=1

Product Details:

• Sentek UK Make K20 Low Cost Conductivity Industrial Electrode

Body Type           PVC
 
Temperature Range         0 – 45°C
 
Range    0 – 2mS
 
Pressure               10 BAR
 
Plate Material    Graphite
 
Cell Constant      K=1
 
Thread Size         1/2" BSP
 
Cable Length      5 metre

 

 

 

 

 

 

 

Additional Information:

• Item Code: K-20

Product Details:

• Body Type    Epoxy
• Cable Length     1 metre
• Connector          Instrument Specific
•  Temp Range       0 – 80°C
•  Shaft Length      120mm
•  Shaft Diameter   12mm
•  Plate Material     Carbon
•  Range      0 – 500µS
•  Cell Constant       K=0.1

 

 

 

 

 

 

 

 

 

Product Details:

Sentek UK Make K40 K=0.1 Low Cost Conductivity Industrial ElectrodeBody Type           PVC
 
Range    0 – 200µS
 
Cable Length      5 metre
 
Connector           Tags
 
Temperature Range         0 – 50°C
 
Pressure               5 BAR
 
Plate Material    Graphite
 
Cell Constant      K=0.1
 
Thread Size         1/2" NPT

 

 

 

 

 

 

 

Additional Information:

• Item Code: K-40

Product Details:

Sensorex USA Make

• Cell Constants: 0.1, 1.0, 10 (see specification sheet for resolution and accuracy by range)

  Reference Temperature: 15-25° user selectable in 0.1° increments

  Reference Coefficient: 0.00-4.00% user selectable at 0.01% increments

  Ambient Temperature Range: 0 to 50°C

  Automatic Temperature Compensation: 10K NTC

  Dimensions: 5.9 in (150 mm) x 8.0 in (203 mm) x 2.8 in (72 mm)

  Power Supply: 6 x AAA batteries or 115/230 V AC adapter